Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences EMS Platinum Aperture with 200 µm hole, 0.06 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 200 µm
O.D.: 6.35 mm
Thickness: 0.06 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-50-100-200 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-50-100-200 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences Tripod Polisher Parallel Polishing Mount Stainless Steel
Parallel Polishing Mount (S. Steel) - For use with Tripod Polisher Model 590.
Electron Microscopy Sciences Lapping & Polishing Fixture Flat Mounting Blocks, 1.25", Stainless Steel
1" (25 mm) diameter stainless steel mounting blocks for lapping and polishing fixtures. For use with Models 150, 151, 155.
Diameter: 1.25"
Material: Stainless Steel
Electron Microscopy Sciences Micrometer Dual Extension
Accessory for lapping and polishing machine. Micrometer Dual Extension - For use with Model 155D
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-10-20-70 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-10-20-70 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences Tripod Polisher PrecISIon Locking Micrometer
Special larger diameter locking rings for easy locking and are graduated in one micron increments with 13mm travel. Non-coating Micrometers not recommended. - For use with Tripod Polisher.
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 70-70-50-50m, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 70-70-50-50m
Dimensions: 41.0 x 4.0 x 0.10 mm
MSC SPI Micrometer Calibration Standard, 9 in, 0.000240 in Accuracy, Flat End
This micrometer calibration standard is designed for precise measurements and is suitable for use with various micrometers. It includes a heat insulating handle for comfortable and accurate handling.
- Maximum length of 9 in
- Accuracy of 0.000240 in
- Flat end shape
- Pre-calibrated for immediate use
- Includes heat insulating handle
- Designed for use with micrometers
Electron Microscopy Sciences EMS Gold Aperture with 70 µm hole, 2 mm O.D., 0.53 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 70 µm
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences EMS Gold Aperture with 10 µm hole, 3 mm O.D., 0.12 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 10 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Gold Aperture with 30 µm hole, 3 mm O.D., 0.12 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 30 µm
O.D.: 3 mm
Thickness: 0.12 mm